Alborghetti Suit: Codpiece

[peteyfrogboy]

The codpiece is made and installed. The main part of the codpiece is a single layer of wool with no interlining, stuffed with strips cut from a failed linen sleeve lining. The base is one layer of the heavy wool and a lining of white linen. The edge binding and racing stripe are velveteen.

I sewed the center seam on the machine, then turned t and basted it to the wool base. I sewed around the base of the stuffed portion, leaving an open section on one side to put the stuffing in. Once it was stuffed, I closed up the hole and sewed the trim on. Next came the binding in the usual manner. I did it in two pieces only because that’s what was demanded by the length of scraps I had on hand. At this point I sewed five pairs of hooks and eyes (alternating) on the center front opening of the trunk hose. The point of the codpiece was sewn in at the bottom of the opening; each side was only sewn on for about 2″. Eyelets in the codpiece and trunk hose finished the process.

Originally published at Lorenzo's Workshop